Manually operated tamping machine - Type 1 HST

 Construction

  • Simple stand of welding construction.

  • Cam disk manually driven by a crank for getting the tamping movement.

  • Force of impact determined by tension springs which can be quickly exchanged.

  • Attached scissor unit - also manually operated.

  • Sturdy table for taking the carbon brush movable up and down for the cable length by means of a foot pedal

  • Short set up time, thus suitable for small batches.

Principle of the tamping contact:

From the copper cable length, which protrudes of the tubular ram, a knot is made at the bottom of the drill hole. Copper powder is now inserted uniformly on top of the knot and between drill hole wall and copper cable and tamped firm, until the drill hole is filled to the requested level.

Interchangeable parts:

From the copper cable length, which protrudes of the tubular ram, a knot is made at the bottom of the drill hole. Copper powder is now inserted uniformly on top of the knot and between drill hole wall and copper cable and tamped firm, until the drill hole is filled to the requested level.

Use:

For processing tamping contacts on carbon brushes and cutting the copper cable to the required length.

 

 

 

 

Workspace

a = 4 - 55 mm
t = 4 - 40 mm
r = 12 - 70 mm

Copper cable diameter: 1,5 to 5mm
Copper cable cross-section: 1-10 mm²
copper cable length: 20-80/200 mm
Hole depth: 5-20 mm

Technical specifications

  • Cable drum length: max. 200 mm
  • Hub ob the tamping tube: 15 - 27 mm
  • Strokes:
    depend on operator
  • Footprint: 600 x 500 x 1.400 mm
  • Net weigth: approx 100 kg
  • Gross weight: approx 170 kg

Stampfmaschine HST 1